YOU NEED TO SET UP AN AUDIO DEVICE MOVIE
YOU NEED TO SET UP AN AUDIO DEVICE DRIVER

They're only a little more expensive, will play standard DVDs and Blu-rays too, and 4K discs are the best way to take advantage of a 4K-compatible TV or projector (and I'm assuming you'll be using this for indoor movie nights as well). You still have some discs, right?ДЇor the most part we recommend getting a 4K Blu-ray player at this point. If your Wi-Fi isn't strong enough to reach your makeshift theater, and you don't want to burn through all your mobile data, Blu-ray players are very inexpensive and should have your viewing needs covered. Keep in mind, too, that running a hotspot typically drains your battery fairly quickly, so you should also consider a USB battery pack, or plug it in via an extension cord. This guide is for connecting your iPad to your phone, but will work for connecting any device. Once it's active, you just connect the streaming stick or projector to it just like it's 'normal' Wi-Fi. Most modern phones have a feature that lets you create a hotspot. Streaming a movie chews through data, though, so make sure you've got plenty or are on an unlimited plan. This uses a cellular signal for internet, and then broadcasts a little Wi-Fi bubble near the phone. It's worth noting that you'll be able to see any texture in the screen's surface, so a garage door or the side of your house won't be ideal because you'll see any design, seams or imperfections.ДЄnother option that might work is to turn your phone into a Wi-Fi hotspot. There are also infinite DIY options basically anything fairly reflective and lacking color will work. Keep in mind that their fans run constantly, so in a smaller or enclosed yard, this can be annoying. However, they tend to be easier to set up and take down. Inflatable screens need to be secured to the ground, and any wind is going to set them rocking. Rigid-frame screens are more expensive and a little harder to assemble, but are more resilient against wind and typically have smoother screens for a better overall image. We don't have a specific suggestion here, but we do have a few tips while you're looking. Some have HDMI, so you'll need an HDMI cableВ from the soundbar to the projector. Nearly all projectors have an analog audio output, which can connect to most soundbars including Vizio.

Next, click in the Device Port column to select the audio inputs of your interface for your new input buses.Read more: Best soundbar for 2021: Yamaha, Klipsch, Vizio, Sonos and moreДon't forget that you'll need a cable to connect it to the projector. You can route audio from your Native Instruments audio interface into Cubase via this input for the purpose of recording. This has now added a new Stereo in or two Mono Ins.microphones), set Configuration to Mono and Count to 2.В Under Bus NameВ you can rename your InputВ Bus in our example we have called it Additional Bus. If you need mono connections going into Cubase (e.g. mixer output, stereo synth), set Configuration to Stereo and Count to 1. If you need stereo connections going into Cubase (e.g.Select the Inputs tab and click the Add Bus button.Open the Studio menu and select Audio Connections.More sophisticated setups may require you to choose different outputs or even add more busses for flexible routing options. Note: Normally you want to choose the main stereo outputs of your audio interface. You can however select the outputs of your choice from the Device PortВ drop down menu.

You can route audio from this output into your Native Instruments audio interface.В Depending on which Native Instruments soundcard you are using, your outputs should be set up now.

This has now added a new Stereo Out bus to the mixer.

Under Bus NameВ you can rename your Bus in our example we have called it Additional Bus.

Set Configuration to Stereo and Count to 1.

Note: if you already set up buses that did not work correctly, right-click them one after the other and select Remove Bus.

Select the Outputs tab and click the Add Bus button.

Open the Studio menu and choose Audio Connections.

YOU NEED TO SET UP AN AUDIO DEVICE DRIVER

Once the ASIO driver for your audio interfaceВ has been selected, close the Device Setup by clicking OK.

Choose your audio interface from the ASIO DriverВ drop-down menu.

Select the VST Audio System options under Devices.

Note: previous to Cubase 9.5 this option was called Devices and Device Setup. Open the StudioВ menu and choose Studio Setup.

You need to set up an audio device